Solaris management software


















In less than three hours, the entire six-silo system is erected and ready to load with proppant. Our silo system at work during a "zipper frac" in the Permian Basin. Learn More. Skip to main content. Search form. Solaris Lens Login. Proppant Management System. If you are using the Solaris or Linux operating system and a path is not defined, use. If you are using a Windows platform, if the command alone does not work, add.

Force a complete cleanup and removal of an installation. Note: Reboot the system after issuing the command in Windows.

You can install software by using telnet from a remote terminal to the server that will perform as the actual management host. The set up will depend on the shell you use. The following shows an example of setting up the local terminal display:.

On the local terminal, enter the following to enable display from the Common Array Manager host:. Confirm that the remote display is working by entering the following command to see if it displays to your local terminal:. The following covers installing the management software on a host running the Solaris Operating System as described in the following sections:. The array installation files and installers are provided in a compressed. The process unpacks the contents of the file on the host and then proceeds with the installation.

Before you continue, check that all of the requirements are met, as listed in Check the installation space requirements. To Install the Software Solaris :. Log in to the management host Solaris OS as root. Insert the host software installation CD into a drive on the management host. If the compressed installation files do not appear in a directory window:.

To begin unpacking the contents of the compressed installation file, enter the following command or click the RunMe icon if using a file manager:. The unpacking process takes a couple of minutes. The contents of this directory includes:. If the wizard screen is not redisplayed or if you receive an error message, recheck that the host requirements in Check the installation space requirements.

Summary information about the installation is displayed. Click Next to display the license agreement screen. Click the radio button to accept the license agreement, and then click Next to continue the host installation.

You are prompted to select the installation type. Make your selection as follows, and then click Next. If you selected Custom in Step 8 , you are prompted to select the installation components. When prompted to review your selection, check it and click the Install button. When the host installation is complete, the View results screen is displayed.

Eject the CD and remove it from the drive. If the compressed installation file does not appear in a directory window:. To unpack the contents of the compressed installation file, enter the following command:. To use a different directory, enter the following command:. The host software installer is launched automatically after the installation files are unpacked and the initial host installer prompt is displayed.

When prompted about the license agreement, accept the agreement and press Return. When prompted to select the installation type, do one of the following:.

If you selected Custom in Step 6 , you are prompted to select the installation components, as follows:. When the installation is complete, the host software installer Installation Summary screen is displayed. Press Return to complete the installation. The following covers installing the management software on a host running a Linux Operating System as described in the following sections:. To Install the Software Linux :. Log in to the management host Linux OS as root.

When the host installation is complete, the host software installer Installation Summary screen is displayed. The Suspend confirmation window is displayed, as shown in Figure 23—9. You do not need to run a windowing system, such as CDE, for the sys-suspend shell command to work, nor do you need to be superuser.

The Suspend confirmation pop-up window is displayed, as shown in Figure 23— If a window system is not running, the command executes without displaying the confirmation pop-up window. Power on all external devices connected to your system. See Figure 23—7 or Figure 23—8 for power key locations.

You can use the Dtpower program to specify times for your system to shut down automatically. This feature is called AutoShutdown. If you have a sun4u desktop machine, you can also set your system to power on automatically at a specified time. This feature is called AutoWakeup. AutoShutdown uses the Suspend feature to automatically power off your system.

When the system powers up again, the system resumes in the state in which the system was suspended. You can also specify the following values:. The start and finish times when AutoShutdown can occur during each day. If you specify the same time for both start and finish, AutoShutdown can occur at any time of day.

See Figure 23— The time of day when the system automatically powers on and resumes AutoWakeup after being suspended by AutoShutdown. This feature is only available on sun4u desktop systems.

AutoWakeup does not occur after you suspend a system manually. AutoWakeup can occur only after an AutoShutdown. Consecutive executions of AutoShutdown do not occur less than five minutes apart, even if the idle time setting is under five minutes. In the numerical box for Shutdown During This Interval If Idle for, enter the duration for which the computer must be idle before shutting down. In Figure 23—12 , the AutoShutdown occurs after 1 hour of idle time between the hours of p.

If you want to reject the displayed settings, select Cancel. The currently active settings are displayed in the window. Click OK to activate the new settings you made in the Dtpower window. If pressing the Power key does not suspend your system, refer to the following procedure. When the system fails to suspend, an alert appears.

The exact message within the pop-up window may vary, depending on the cause of the problem, but the Suspend Failed window appears similar to the following figure. Power Off turns off power without preserving the current operating state, as a suspend operation usually does. When the Suspend Failed window appears saying Device error during suspend , select Cancel.

If you have not already saved your work, do so now. Take the following corrective action before you try to suspend your system again:. An unsupported device or a device performing nonresumable activity might be the cause of this problem.

If the device specified by the console message is performing a nonresumable activity, stop the activity and try to suspend again. If your system contains devices in addition to the default configuration, then these devices might not support the Suspend feature. In that case, continue with the next step. Before you try to suspend again, you must attempt to unload the device driver.

Perform the following steps:. If Suspend does not succeed, the alert window is displayed again. In this case, continue with the next step. Since the error persists, you can suspend your system. You can select Power Off to shut down the system properly without causing file system damage.

When you power on again, your system automatically reboots. If you select Power Off and the command fails, your system does not support software power off. An alert window is then displayed with information about the power-off failure, as shown in the following figure:. Your system might not support software power off due to a non-Type 5 keyboard or an outdated system PROM. If you do have a Type 5 keyboard installed, then contact your system provider for a system PROM upgrade.

Also, some sun4m-architecture systems drop to an OpenBoot TM PROM prompt after a suspend operation, because those systems do not support software power off. When possible, obtain and install a device driver that supports Suspend features, to solve the problem for that device in the future. Select Cancel when the Suspend Failed window appears with the following message: Process cannot be stopped. If a process is a real-time process or is performing certain special network operations, that process might refuse to suspend gracefully.

In most cases, this is only a temporary condition that you can correct by trying to suspend again. However, if the problem persists, stop the offending process, as specified in the console message, and try to suspend again.

Select Cancel when the Suspend Failed window appears with the following message: Abnormal condition during suspend,. When you execute a Suspend command, your system creates a statefile to preserve the current state of your system. If the file system that contains the statefile is full, a Suspend Failed window appears with the following message:.

You must have a minimum of 10 Mbytes of free space. Clean up a partition before you try to suspend again. Another solution is to change the location of the statefile to a file system with sufficient space, as described in the power. If Suspend does not succeed, the alert window appears again.

After a Resume, the system screen lock is invoked by default. To disable the screen lock before you use the power key to Suspend, use the following procedure. You cannot disable screen locking that is put into effect by AutoShutdown.

This is a security feature. It ensures that only someone who knows your password can get access to your work session when the system resumes. Modify the speckeysd. In place of this step, you may also kill the speckeysd daemon and then restart the daemon. Types of Power Management Power Management software enables two ways of reducing power consumption: Device power management and Suspend-Resume. Device Power Management Device power management automatically reduces the amount of power that individual devices use when they are not performing an function.

Suspend-Resume Suspend-Resume is a time-saving feature that allows you to turn off the power to your system without losing the state of your current activities. Suspend-Resume can be active on your system in the following ways: Suspend-Resume is used automatically in some Energy Star 2.

Dtpower software can be used to activate Suspend-Resume automatically at designated times. Caution — Do not use System Power Management on systems that do work that should not be interrupted. Note — Intel hardware running the Solaris operating environment does not support Power Management. Power Management Features on Different Hardware Systems The Power Management features are enabled by both the power-saving capability of the hardware, and the software provided with the Solaris operating environment.

Power Management-capable hardware provides the features discussed in the following sections. Energy Star 3. Systems Noncompliant with Energy Star Systems that are noncompliant with Energy Star regulations perform power management for only the monitor.

To determine your system's architecture, use the uname -m command. Dtpower Software Dtpower launches a graphical user interface GUI that allows you change your power saving scheme. Power Saving Schemes The simplest way to manage your system power is by selecting one of three power-saving schemes offered by the Dtpower program: Standard — Power management for all capable devices Minimal — Power management for monitors only Disabled — No power management In addition to these three schemes, you can also create a customized power scheme, which is discussed in Customizing Power Schemes.

Accessing Dtpower In previous releases, you needed superuser permissions to start Dtpower and then edit the configurations. Note — If you are unable to access Dtpower for editing purposes, you might not have the correct permissions. From the pull-down list, select Tools.

From the pull-down list, select Power Manager. OK puts into effect the settings currently displayed in the window. The default values if this is the first time you have run Dtpower. Cancel does not return to earlier values if you have already selected OK. Help displays the Dtpower Help window. Figure 23—2 The Dtpower Basic Window Power Saving Schemes The simplest way to select a level of power management for your system is to choose one of the preset power saving schemes.

The available power schemes are: Standard scheme — The default Power Management settings of your hardware determine the implementation of the Standard scheme. This launches the Dtpower basic window. From the pull-down list in the Current Power Saving Scheme box, choose a scheme. Note — Some schemes in the pull-down list might be grayed out. Customizing Power Schemes This chapter explains how you can create a customized power scheme, overriding the schemes that come preset in the Dtpower software.

Power Management of Overall System The system idle time defines the length of time for which the CPU and the devices connected to your system must be idle before they power down. The Quick Edit tab is displayed. Figure 23—5 Quick Edit Tab From the pull-down list for Default System Idle Time, choose the amount of time you want all the devices to be idle before powering down.

You can also type in the system idle time. Power Management of Monitors You can override the power management for the monitor from the overall system power management through the Dtpower GUI. Note — In some earlier versions of the Solaris operating environment, power management for monitors was handled through the screensaver options of your windowing system, rather than through the Dtpower program. In the Dtpower basic window, select More. The pull-down list for the idle time of the monitors becomes active.

Figure 23—6 Pull-Down List for Disks Idle Time Either choose a time from the pull-down list of idle times or type a unique value in the edit box. Click OK. To Reactivate the Monitor Move the mouse or press any key. Power Management of Disk Drives You can override the power management of disk drives just as you can for monitors.

The corresponding pull-down list for idle time becomes active. Using the Suspend-Resume Feature This section discusses the issues to consider when you use the Suspend-Resume feature, for example: You can use the Suspend-Resume features to manually shut down your system, and then start up your system in the same working state.

You can activate or turn off the Suspend-Resume feature. Note — The Solaris operating environment also provides a command line interface so that a system administrator can change the default settings and idleness definition of a system. Choosing to Use Suspend-Resume Powering off a desktop system may interfere with some operations that involve that machine.

Electronic Mail Issues Mail is not sent to any mail spool file on a machine while the machine is suspended. Mail Alias Issues Mail aliases on a machine are not available to other users while that machine is suspended. Remote Login Issues While your machine is suspended, you can not access the machine by remote dial-in.

Networked Software Issues The Suspend-Resume feature might have an impact on a networked application. Cron Job Issues Operations specified in a cron file do not run during the time a machine is suspended. When a system resumes, cron jobs scheduled to run during the time the system was suspended with the Power Management software are handled in the following way: The cron job scheduled to run earliest during the time the system was suspended is started as soon as the system resumes.

Calendar Manager Issues The Calendar Manager software does not display pop-up windows for scheduled events that occur while the desktop machine is suspended. Note — The Suspend-Resume feature is not supported on systems configured as diskless clients.

Suspend allows you to do the following without losing the current state of your system: Move your system from one location to another. Power off your system to conserve energy. Note — Do not use the Suspend feature if you need to reconfigure your system.

Before you suspend a system, you must wait for operations such as the following to finish: Audio activity Floppy disk activity Tape activity ISDN activity Synchronous TTY activity Initiating a Suspend and a subsequent Resume usually requires less than a minute.



0コメント

  • 1000 / 1000